Contact lenses require the wearer to obtain a prescription outlining the type to purchase even if they are not meant for correction of vision. During physical examination of the eyes, the optician checks for astigmatism, hyper myopia, myopia and general eye health. Your visual strength will also be tested before prescription of Sacramento contact lenses.
When wearing them, hand washing comes first. The hands have to be dried after washing. Using the dominant hand the lens is held at the tip using the pointer finger and then the middle finger is used to pull down the lower eyelid.
The pointer finger is also used to elevate the lid at the top besides holding lenses. You should look up at this point and place the lens in a gentle manner on the lower side of the sclera. The pointer finger is then removed and the lid released. After doing this, the eye should be closed for a moment to give a chance for the lens to be centered.
The process of taking them off starts with washing the hands too. They should be thoroughly dried thereafter. You should then look up and pull down the lower lid using the middle finger of the dominant hand. The index finger is then used to access the lenses on the lower part. It is then slid down the sclera and squeezed between the thumb and pointer finger. Be careful during the removal process.
The disposable ones are thrown away after a single use. Using them eliminates the need for constant cleaning and storage. However, these processes are not as hard as they are made to sound. As long as you follow the instructions given by the optician, everything will just go smoothly. There are specially made solutions for rinsing, disinfecting, protein removal and conditioning the lenses.
There are some steps to be followed in maintenance of healthy ad relaxed use of these lens. The initial step in this procedure is rubbing the lens for around 20 seconds after application of a cleanser on its sides. The rinsing process must be thorough taking up to 5 seconds using a special rinsing solution.
In storage, they are soaked for at least four hours in the cleanser solution. The solution is never to be reused. It should be discarded immediately after use. After doing all this, you can go ahead and put on lens again. If you notice any remaining debris, just rinse them before inserting them into the eyes.
If they are not in use, they must be kept in specially made cases for safety purposes. They should never be soaked in a saline solution. This does not result to disinfection. The cases may remain closed for a period of thirty days if they are not in use. However, beyond this, they have to be cleaned and disinfected before insertion. The solutions used should be professionally prepared. Otherwise, using something else will not be effective in accomplishing the purpose. Also, the results will be compromised in case the solution is been reused. The case the lens are stored in should be changed on a monthly basis.
When wearing them, hand washing comes first. The hands have to be dried after washing. Using the dominant hand the lens is held at the tip using the pointer finger and then the middle finger is used to pull down the lower eyelid.
The pointer finger is also used to elevate the lid at the top besides holding lenses. You should look up at this point and place the lens in a gentle manner on the lower side of the sclera. The pointer finger is then removed and the lid released. After doing this, the eye should be closed for a moment to give a chance for the lens to be centered.
The process of taking them off starts with washing the hands too. They should be thoroughly dried thereafter. You should then look up and pull down the lower lid using the middle finger of the dominant hand. The index finger is then used to access the lenses on the lower part. It is then slid down the sclera and squeezed between the thumb and pointer finger. Be careful during the removal process.
The disposable ones are thrown away after a single use. Using them eliminates the need for constant cleaning and storage. However, these processes are not as hard as they are made to sound. As long as you follow the instructions given by the optician, everything will just go smoothly. There are specially made solutions for rinsing, disinfecting, protein removal and conditioning the lenses.
There are some steps to be followed in maintenance of healthy ad relaxed use of these lens. The initial step in this procedure is rubbing the lens for around 20 seconds after application of a cleanser on its sides. The rinsing process must be thorough taking up to 5 seconds using a special rinsing solution.
In storage, they are soaked for at least four hours in the cleanser solution. The solution is never to be reused. It should be discarded immediately after use. After doing all this, you can go ahead and put on lens again. If you notice any remaining debris, just rinse them before inserting them into the eyes.
If they are not in use, they must be kept in specially made cases for safety purposes. They should never be soaked in a saline solution. This does not result to disinfection. The cases may remain closed for a period of thirty days if they are not in use. However, beyond this, they have to be cleaned and disinfected before insertion. The solutions used should be professionally prepared. Otherwise, using something else will not be effective in accomplishing the purpose. Also, the results will be compromised in case the solution is been reused. The case the lens are stored in should be changed on a monthly basis.
About the Author:
You can visit adairoptometry.com/ for more helpful information about On Caring For Sacramento Contact Lenses.
No comments:
Post a Comment